Files Required
Download
1. AQ4501_sptool.zip 2.AQ4501_USBdriver.zip 3.AQ4501 FlashFile Mirror.zip
I am not responsible if anything wrong ! please proceed with caution !!!
Step 1 :- Firstly Download and Install USB Drivers in your PC from the download Section Below.
Step 2 :- Now Download Main ROM Zip and SP Flash Tools.
Step 3 :- After downloading Extract Them Into A Separate Folder into your PC. Turn off Your Anti-Virus During This Process For Some Time.
Step 4 :- Now Switch-Off YourCanvas A1 , Remove Battery & Re-Insert It to Ensure that its Properly Switched Off.
Step 5 :- Next Open SP-Flash Tools From The Same Extracted Folder.
Step 6 :- Now click Click Scatter Loading & Select The ‘MTTK65XX_Scatter.txt‘ From The Directory Where you extracted the Main ROM.
Step 7 :- Hit the Download button and SP Flash Tools will start searching for your device.
Step 8 :- Now connect your device with a USB Cable in the switch off mode.
Step 9 :- Your device will be detected by SP Flash Tools and Upgrade Process will start.
Step 10 :-The process will complete in few minutes and then a success popup will appear, now disconnect your phone reinsert its battery and power it on.
You are done !!!
Download
1. AQ4501_sptool.zip 2.AQ4501_USBdriver.zip 3.AQ4501 FlashFile Mirror.zip
I am not responsible if anything wrong ! please proceed with caution !!!
Step 1 :- Firstly Download and Install USB Drivers in your PC from the download Section Below.
Step 2 :- Now Download Main ROM Zip and SP Flash Tools.
Step 3 :- After downloading Extract Them Into A Separate Folder into your PC. Turn off Your Anti-Virus During This Process For Some Time.
Step 4 :- Now Switch-Off YourCanvas A1 , Remove Battery & Re-Insert It to Ensure that its Properly Switched Off.
Step 5 :- Next Open SP-Flash Tools From The Same Extracted Folder.
Step 6 :- Now click Click Scatter Loading & Select The ‘MTTK65XX_Scatter.txt‘ From The Directory Where you extracted the Main ROM.
Step 7 :- Hit the Download button and SP Flash Tools will start searching for your device.
Step 8 :- Now connect your device with a USB Cable in the switch off mode.
Step 9 :- Your device will be detected by SP Flash Tools and Upgrade Process will start.
Step 10 :-The process will complete in few minutes and then a success popup will appear, now disconnect your phone reinsert its battery and power it on.
You are done !!!
No comments:
Post a Comment